Cairns Timber Floor Installation
There are many contractors for floor timber installation in Cairns. However, not all of these are really qualified to do the job. There is a standard for doing things, and you may be surprised that there are several. Yes, there is an ideal process for installing timber floors.
Today, we will provide you with an insight into how we do things at Australian Construction. In the end, you can use this as a guide when hiring contractors for a job like this.
Removal of baseboards
To make floor timber installation in Cairns effective, the first thing that we look at is the baseboard. Not all houses have this. Some have concrete flooring.
Whatever the case, we either have to remove the baseboard or sand the concrete. This process is what we call substrate preparation. If the construction is new, we will work on the best method to prepare the substrate.
This process can take a while, but it is the secret to having good timber flooring. It is this process that guarantees flat wood flooring.
Final sub-floor preparation
After sanding and grinding the concrete, we need to clean it. If the base is a board, we may have to replace it with a new one or repair weak spots.
We also have to remove nails and make sure that the base is smooth. Part of this process is to ensure that there are no indentations. We also want to remove the gaps, which you normally see at the edges where the floor and the walls meet.
Adding moisture barrier
Not all projects require this. However, we strongly recommend it if you are in a cold region. Winter produces water, and the last thing you want in a wooden structure is water.
If wood gets moisture, it is likely to accumulate from underneath the surface. The top one is alright because you wipe it all the time, but you have no control underneath. This moisture s going to weaken the wood, and also give life to organisms.
And where there is water, there will be pests. Another thing that can happen is that the wood can be a breeding ground for moulds. Different types of moulds can cause diseases.
To prevent this, we add a moisture barrier on the concrete or baseboard. Typically, we use insulation foam. Then, we can add plywood before we finally lay down the wooden panels.
But again, this is not always necessary.
The last step for timber floor installation in Cairns is to lay down the wooden panels. This takes some serious skill and experience. As you know, these panels come in all shapes and sizes.
You need an expert contractor to cut them according to the length you need, and this is based on the floor area of your house.
There are also different techniques for laying down the panels. The most common is by nailing, but this is not aesthetic. At Australian Construction, we usually use the direct stick or floating method.
Summary: Timber Floor Installation in Cairns
Use this knowledge to interview contractors. If they mention these processes, it is likely that you are dealing with a legit group. For any questions or concerns that you may have, let us know and we will help you out. Our phone number is at the top of our website.
If what you need is a project quote, we can discuss that over the phone, or you can use our “request quote” form. Provide us with the details of your project and we will assess it from here. One of our engineers will be in contact with you soon.